Superabrasive Grinding Wheels, CBN Grinding Wheels, Diamond Grinding Wheels

Trueing and Dressing Diagrind SUPER ABRASIVE Wheels

Diagrind wheels can be used without trueing and dressing. Indicating the wheel on the shank in back of the head to obtain .0005 inch or less runout will help the wheel to wear itself in faster.

If better conditions for tolerance or finish are needed, the wheel should be trued and dressed in place. When trueing diamond wheels, a silicon carbide wheel can be used. When trueing a CBN wheel, generally an aluminum oxide wheel sould be used. A resin bond diamond wheel can be used on smaller diameters. See chart:

The abrasive wheels listed below are available from Diagrind:

A70P7B3 1/16
A70P7B3 1/8
C60-0+VA
28A220 M5-V31
TA80K10VE
1/16 wide
1/8 wide
1/4 wide
1/4 wide
1/4 wide
6" Dia. X 1-1/4 I.D.
7" Dia. X 1-1/4 I.D.
7" Dia. X 1-1/4 I.D.
7" Dia. X 1-1/4 I.D.
7" Dia. X 1-1/4 I.D.

Dressing stones also stocked by Diagrind:
For DIAMOND Wheels:
Silicon Carbide 220 grit I or J Grade
For CBN Wheels:
Aluminum Oxide 220 grit I or J Grade
COOLANTS:
Diagrind diamond and CBN wheels will provide good performance without coolant up to 1/2" wheel diameter. This feature has led to wide acceptance on jig grinding applications.
Diagrind DIAMOND wheels work well with synthetic coolants.
Diagrind CBN wheels provide best results with grinding oil.